| Supply of oil in water analyzer |
| Negotiable / |
| 300 |
Place of delivery:
| 2019-11-02 |
| 255 days |
| With the continuous progress and development of industrial production technology, the measurement of oil content in water is becoming more and more important, and the application of oil content analyzers in water is becoming more and more widespread, especially the measurement of trace oil content in water is being increasingly valued. There are many measurement methods in the oil-in-water measurement laboratory, which will not be introduced here. We will focus on the JHR61 series of oil-in-water analyzers for online continuous measurement produced by Dejun Instrument of Shijiazhuang. |
JHR61 water-in-oil analyzer is an on-line water-in-water measurement instrument installed directly on the industrial site. It targets the small amount of oil in water as the measurement target. The design scheme is selected to highlight the practicality and stability of the field measurement instrument. Maintenance operation is a prominent technical highlight of the product. JHR61 is a water-in-oil analyzer based on the measurement principle of the microwave energy level variable. It is a continuous, online work. Capable of measuring crude oil, refined oil, fuel oil, lubricating oil or hydraulic oil mixed in water, and aromatic hydrocarbon solvents in water. Due to the microwave measurement principle, no special maintenance is required during the work, and no need to clean, purge, wipe, or clean the probe. It is a rugged and reliable high-precision online measuring instrument that is maintenance-free. Advanced microwave sensor measurement technology provides high accuracy and repeatability as well as achievable trace oil content in water. There are standard 4-20 mA outputs for remote monitoring.
A microwave radiates into the surrounding medium through an antenna. The energy levels of microwave oscillations are absorbed by different media. There is a fixed difference. The difference between water and oil is large. A certain microwave energy level corresponds to a certain oil-water mixing ratio. The relationship that can be copied is our basic basis for oil and water measurement.
Applicable to the measurement of media containing benzene, toluene, ethylbenzene, xylene, light hydrocarbons, crude oil, diesel, gasoline, heavy fuel oil, jet fuel, kerosene, lubricants, and phenol. Application areas:
1. Oil platform monitoring of oil content in wastewater
2. Monitoring of wastewater discharge from oil refineries and chemical plants
3. Oil leakage monitoring of boiler make-up water and condensate water
4. Oil detection in oil refinery wastewater treatment plant
5.Heat exchanger leak detection
6. Detection of oil content in industrial wastewater
7. Oil leakage monitoring of circulating cooling water
8. Detection of oil content in domestic sewage
Power: 24VDC (two-wire system)
Output signal: 4-20 mA Intelligent range: 0-5000PPM
Medium temperature: 0-160 ° C
Ambient temperature: -25-70 ° C
Features: simple structure, no auxiliary device, the measuring probe does not need to be cleaned, purged, wiped, cleaned, directly installed, maintenance-free operation.